Properties of Electrochemical Impedance and Surface Characteristics of Anodized AA 6061
(*) Corresponding author
DOI: https://doi.org/10.15866/ireme.v10i3.8751
Abstract
This paper was intended to figure out the corrosion resistance and surface morphology of AA6061 that is anodized with 1M phosphoric acid and cathode titanium in several potential variations. The surface morphology was examined by scanning electron microscopy (SEM), the surface roughness was investigated by Portable Surface Roughness Tester and finally the corrosion resistance was analyzed by the electrochemical impedance spectroscopy (EIS). The surface morphology showed that an increased potential of electricity supplied during the anodizing process leads to enlarged pore size larger or equitable to that occuring on the surface of the specimen, leading to decreased surface roughness values. Surface roughness tests indicated the lowest roughness values achieved from the anodizing with 30V potential was 0.674 μm. From the data, XRD showed the most significant influence on the process of anodizing, visible from the top of the resulting diffraction. As the potential increases, the intensity will decrease while the plane increases. The examination of corrosion resistance with EIS showed that the first step in the process of anodizing is an increase of Relp associated with an increased area coated by a layer of oxid.
Copyright © 2016 Praise Worthy Prize - All rights reserved.
Keywords
Full Text:
PDFReferences
J. M. Wheeler, J. A. Curran, S. Shrestha, Microstructure and multi-scale mechanical behavior of hard anodized and plasma electrolytic oxidation (PEO) coatings on aluminium alloy 5052. Surface And Coating Technology, Vol. 207, pp.480-488, 2013.
http://dx.doi.org/10.1016/j.surfcoat.2012.07.056
T. Kikuchi, T. Yamamoto, R. O. Suzuki. Growth Behavior Of Anodic Porous Alumina Formed In Malic Acid Solution. Applied Surface Science, Vol. 284, pp. 907-913, 2013.
http://dx.doi.org/10.1016/j.apsusc.2013.08.044
R. Sadeler, S. Atasoy, A. Anci, Y. Totyik, The Fretting Fatigue Of Commercial Hard Anodized Aluminium Alloy. Journal Of Materials Engineering And Performance. Vol.18, pp.1280-1284, 2009.
http://dx.doi.org/10.1007/s11665-009-9388-8
V. Raj, M. Mumjitha,. Comparative Study Of Formation And Corrosion Performance Of Porous Alumina And Ceramics Nanorods Formed In Different Electrolytes By Anodization. Materials Science and Engineering B, Vol. 179, n. 1, pp. 25–35, 2014.
http://dx.doi.org/10.1016/j.mseb.2013.10.001
U. Malayoglu, K. C. Tekin, U. Malayoglu, S. Shresta. An Invcestigation Into the Mechanical and Tribological Properties of Plasma Electrolytic Oxidation and Hard-Anodized Coatings on 6082 Aluminium Alloy, Materials science and Engineering : A, Vol. 528, n. 24, pp. 7451-7460, 2011.
http://dx.doi.org/10.1016/j.msea.2011.06.032
L. Bouchama, N. Azzouz, N. Boukmouche, J.P.Chopart, A.L.Daltin, Y.Bouznit, Enhancing Aluminum Corrosion Resistance by Two-Step Anodizing Process. Surface And Coating Technology, Vol. 235, pp. 676-684, 2013.
http://dx.doi.org/10.1016/j.surfcoat.2013.08.046
L.Wu, J.Liu, M.Yu, S. Li, H.Liang, M.Zhu, Effect Of Anodizing Time On Morphology And Electrochemical Impedance On Anodic Films On Titanium Allay In Tartrate Solution, International Journal of Electrochemical Society, Vol. 9, n.9, pp. 5012-5024, 2014.
W. Bensalah, M. Feki, M.Wery, H.F. Ayedi. Chemical Dissolution Resistance of Anodic Oxide Layers Formed in Aluminium. Transaction of Non Ferrous Metals Society of China, Vol. 21, n. 7, pp. 1673-1679, 2011.
http://dx.doi.org/10.1016/s1003-6326(11)60913-8
D. Zhang, Y. Gou, Y. Liu, X.Guo, A composite anodizing coating containing superfine Al2O3 particles on AZ31magnesium alloy. Surface Coating Technology, Vol. 236 pp.52-57, 2013
http://dx.doi.org/10.1016/j.surfcoat.2013.04.059
A.O. Araoyinbo, A.F.M. Noor, S. Sreekantan, A. Aziz. Voltage Effect On Electrochemical Anodization Of Aluminium At Ambient Temperature, International Journal Of Mechanical and Materials Engineering Vol. 5, No. 1, pp. 53-58, 2010.
J. Martín, C.V. Manzano, O. Caballero-Calero, M. Martín-Gonzalez. High-Aspect-Ratio and Highly Ordered 15-nm Porous Alumina Templates. ACS Applied Materias andl Interfaces Vol. 5, No. 1, pp.72-79, 2013
http://dx.doi.org/10.1021/am3020718
P.H. Setyarini, R. Soenoko, A. Suprapto, Y.S. Irawan. Adhesion Phenomenon of Titanium as Cathode in Aluminum Anodizing. Applied Mechanics and Materials. Vol. 799-800, pp 140-144, 2015.
http://dx.doi.org/10.4028/www.scientific.net/amm.799-800.140
M. Ghrib, R.Ouertani, M. Gaidi, N. Ajoua Khedher, M. Ben Salem, H. Ezzaouia, Effect Of Annealing On Photoluminescence And Optical Properties Of Porous Anodic Alumina Films Formed In Sulfuric Acid For Solar Energy Applications. Applied Surface Science, Vol. 258, n. 12, pp. 4995-5000, 2012.
http://dx.doi.org/10.1016/j.apsusc.2011.12.056
A.L. Vázquez.R. Carrera, E. Arce, N. Castillo, Preparation Of Mesoporous Alumina Films By Anodization: Effect of Pretreatment On The Aluminum Surface And MTBE Catalytic Oxidation. Journal of Alloys and Compounds, Vol. 483, pp. 418-421, 2009.
http://dx.doi.org/10.1016/j.jallcom.2008.07.153
H. Habazaki, M. Uozumi, H. Konno, K.Shimizu, P. Skeldon, G. E. Thompson, Crystallization of anodizc titania on titanium and its alloy, Corrosion, Vol. 45, n.9, pp. 2063-2073, 2003
http://dx.doi.org/10.1016/s0010-938x(03)00040-4
M.Shahzad, M.Chaussumier, R. Chieragatti, C. Mabru, F. Rezal Aria. Influence Of Anodizing Process On Fatigue Life Of Machined Aluminium Alloy. Procedia Engineering, Vol. 2, pp. 1015-1024, 2010
http://dx.doi.org/10.1016/j.proeng.2010.03.110
J.Hitzig, K.Junttner, W.J.Lorentz, W. Paatsch. AC‐Impedance Measurements on Corroded Porous Aluminum Oxide Films. Journal of Electrochemical Society, Vol.133, n.5, pp. 887-892, 1986
http://dx.doi.org/10.1149/1.2108756
F. Mansfeld and M . W. Kendig , Evaluation Of Anodized Aluminum Surfaces With Electrochemical Impedance Spectroscopy, Journal of Electrochemical Society, Vol. 135, no. 4, pp. 828–833, 1988.
http://dx.doi.org/10.1149/1.2095786
J. J. Suay, E.Gimenez, T.Rodriguez,K.Habbib, J.J.Saura, . Characteriztion Of Anodized And Sealed Aluminum by EIS. Corrosion Science , Vol. 45, pp. 611-624, 2003.
http://dx.doi.org/10.1016/s0010-938x(02)00137-3
M. Saeedikhani, M. Javidi, A. Yazdani. Anodizing of 2024-T3Aluminum Alloy in Sulfuric-Boric-Phosporic Acids and Its Corrosion Behavior, Transactions of Nonferrous Metals Society of China, Vol. 23, pp. 2551-2559, 2013.
http://dx.doi.org/10.1016/s1003-6326(13)62767-3
M.Franco, S.Anoop, R.Uma Rani, A.K.Sharma, Porous Layer Character izat ion of Anodized and Black-Anodized Aluminium by Electrochemical Studies. International Scholarly Research Network ISRN Corrosion Volume 2012, Article ID 323676, 12 pages doi:10.5402/2012/323676, 2012
http://dx.doi.org/10.5402/2012/323676
G.E Thompson. Porous Anodic Alumina: Fabrication, Characterization And Applications. Thin Solid Film, Vol. 297, n. 1-2, pp. 192-201, 1997
http://dx.doi.org/10.1016/s0040-6090(96)09440-0
I. Milosev, T.Kosec, H.H. Strehblow. XPS And EIS Study Of The Passive Film Formed On Orthopaedic Ti–6Al–7Nb Alloy In Hank's Physiological Solution. Electrochimica Acta Vol. 53, n.9, pp. 3547-3558, 2008
http://dx.doi.org/10.1016/j.electacta.2007.12.041
Refbacks
- There are currently no refbacks.
Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize